The quality range of bi-manual irrigation cannula is offered at economical prices to the clients. These are widely known for their smooth operation, blunt edges, and low maintenance. The cannulas offered by us are designed using high quality raw material and tested to ensure that these are in compliance with the international standards.  

 

Technical Specifications:

 

• 80 x 22 mm (21gx7/8 in) thin wall cannula curved
• 45 degree
• . 50 mm open end irrigation port

We are engaged in offering a wide range of Bi-manual Aspiration Cannula that is widely used for various medical purposes. These sterilized products are known for their accurate working along with smooth functioning. The products are available in various standard and customized shapes & sizes.   

 

Our range includes:

 

• 60 x 22 mm (23G x 7/8 in) curvet 45 degree,
• .40 mm
• Top aspiration port
• Micro etched 2 mm from end which can be used in polishing capsule.

We are engaged in offering a wide range of i and a cannula (simcoe) that is in line with the international standards. These cannulas are known for the smooth injection of the fluids in the bloodstream. The products are available in various standard and customized shapes. These are carefully packed using quality material and the experts ensure that the products are timely delivered to the client’s end.

 

• I and A cannula (simcoe): . 60 mm (23g/23g) thin wall cannula
• I and A cannula (simcoe): . 60 / . 60 mm (23g / 23g), . 30 mm aspiration port

We are one of the noted manufacturers of a wide range of I and A Cannula with Handle that is widely used across hospitals. These are available in various sizes and dimensions. Further, we also offer customized packaging on the products as per the requirements of the clients. Our products are sterilized packed using quality raw material and timely delivered to the clients.

 

I and A Cannula with Handle (Simcoe)

 

• .60 / .60 mm (23G / 23G) thin wall cannula

Our range of air chamber maintainer cannula is meant for maintaining and injecting various material in the body, during any surgery. These are designed using high quality raw material and are widely appreciated for their low maintenance and easy operation. We also offer customized packaging on the products as per the requirements of the clients.

 

Air chamber maintainer acm (lewicky):

 

• . 90 x 3. 5 mm (20g x 9/64 in)
• flexible tubing 25 cm

Anesthesia Needles

Peribulbar, retrobulbar and peri-retrobulbar needles, ready for use for ophthalmic surgery.

Manufacturing Materials :

• Polyethylene : needle fitting
• Stainless steel: needle tube
• latex : none.

Description :

Sterile, disposable peribulbar, retrobulbar and peri-retrobulbar anaesthetic needles with short 22° bevel (atkinson).

Instructions for use :

These anesthesia needles are designed for administration of topical anaesthetics in ophthalmic surgery.

Check that the individual sterile protective pack is unopened and verify the expiry date.  open the individual sterile protective pack aseptically. Remove the needle aseptically.

do not resterilise. At the end of surgery, place the
needle in a sharps disposal box.

Packaging :

individually packaged in sterile blister packs.

Storage Conditions :

Store at ambient temperature and protect from moisture.

Disposal conditions :

Waste generated :

The waste generated is to be considered as waste
involving infectious or related hazards.

There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g
Construction : synthetic origin

Sterilisation :

The products are sterilised by EtO.

Our clients can avail from us a wide assortment of Retrobulbar (Sharp Point) Cannula that is in compliance with the industry standards. These are widely appreciated for their sleek designs, blunt edges and sterilized packaging. Our products are available in various sizes and dimensions. Further, we also offer customization facility on the products as per the requirements of the clients.  

 

Our range includes:

 

• 1275 Retrobulbar (sharp point): .50 / 38 mm (25 G x 1 ½ in)

The wide range of peribulbar anesthesia cannula is designed using high quality raw material. These are offered in various sizes, lengths, widths and shapes. The range is appreciated for its accurate dimensions, smooth functions, sterilized packaging and durability. Our products are carefully packed and timely delivered to the clients end.

 

Our range includes:

 

• 5109 peribulbar (atkinson): . 50 / 38 mm (27 g x 1 ½ in)
• 5108 peribulbar (atkinson): . 50 / 32 mm (25 g x 1 1/4 in)
• 5001 peribulbar (atkinson): . 60 / 32 mm (23 g x 1 1/4 in)
• 5027 peribulbar (atkinson): . 60 / 22 mm (25 g x 1 7/8 in)
• 5145 peribulbar (atkinson): . 40 / 22 mm (27 g x 1 7/8 in)

Our organization is engaged in offering a wide range of anterior chamber cannulas that is instrumental in maintaining & forming chamber by the injections. These are economical in removing the fluids and other particles during any surgery.  the range is designed using quality raw material and offered in the following models:  

 

• 1273 anterior chamber cannulas (rycroft): . 30 x 22 mm (30 g x 7/8 in)
• 1280 anterior chamber cannulas (rycroft):. 40 x 22 mm (27 g x 7/8 in)
• 1639 anterior chamber cannulas (rycroft): . 50 x 22 mm (25 g x 7/8 in)
• 1281 anterior chamber cannulas (rycroft): . 80 x 22 mm (21 g x 7/8 in)
• 5025 anterior chamber cannulas (rycroft): . 60 x 22 mm (23 g x 7/8 in)

Hydrodissection Cannula :

tip designed for opening of anterior capsule (capsulorhexis) prior to phakoemulsification with a luer lock to allow irrigation for each cystotome; ready for use in cataract surgery.

Manufacturing Materials :

• polyethylene : cannula fitting ;
• stainless steel : cannula tube ;
• latex : none.

Description :

sterile, disposable formed irrigating cystotomes with a 90° angled tip.

Instructions for use :

irrigating cystotomes are used to perform capsulorhexis. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cystotome aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cystotome in a sharps disposal box.

Packaging :

individually packaged in sterile blister packs.

Storage Conditions :

store at ambient temperature and protect from
moisture.

disposal conditions :
waste generated :

the waste generated is to be considered as waste involving infectious or related hazards.  there are two types of waste material : polyethylene and the metal used for the ends of the cystotomes. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

product weight : 1,80 g
construction : synthetic origin

sterilisation :

the products are sterilised by irradiation in accordance with standard en 552.

shelf life : the shelf life years is three years.

we are engaged in offering a wide assortment of capsulorhexis cystotomes that is in compliance with the requirements of the industry. The products are designed using superior quality raw material and are appreciated for their dimensional accuracy, sterilized body and easy usage. These are widely used for various medical applications across the globe.

 

the specifications of the range offered by us include: 

 

• 5042 irrigating cystotome: . 40 x 16 mm (27 g x 5/8 in)
• 5113 irrigating cystotome: . 50 x 16 mm (25 g x 5/8 in)

Our organization is engaged in offering a wide gamut of Capsule Polishing products to the clients. These are in compliance with the industry requirements and are appreciated for their non-toxic body, excellent cleaning capacity, low maintenance and resistance against corrosion. The range is sterilized packed using high quality packing material and offered at industry leading prices to the clients.    

 

• 1604 Capsula Polisher (Kratz): .80 x 22 mm (21 G x 7/8 in)
• 1605 Capsula Polisher (Kratz): .60 x 22 mm (23 G x 7/8 in)

our quality range of lacrimal intubation set is available in various sizes and capacities. These are designed using superior quality raw material and are known for their dimensional accuracy, easy insertion and smooth distribution of fluid. The range is offered at economical prices to the clients.  

technical specifications:

 

• 5010 lacrimal intubation set
• stainless steel probes . 60 mm x 11 cm (23 g x 4 1/2 in)
• silicone tubing length 35 cm

Our experts offer a quality range of DCR Set (5011) that is available in various sizes & dimensions. Designed using high quality stainless steel, these have blunt edges, low maintenance and easy usage. These are offered at economical prices to the clients and ensured that the range is timely delivered to the clients.   

 

The range offered by us includes:

 

• 5011 DCR Set
• Stainless steel probes .90 mm x 4.5 cm (20 G x 1 3/4 in)
• Silicone rod length 40 cm (15 3/4 in)
• Diameter: .80 mm (.032 in)

with an aim to meet the varied requirements of the clients, we offer a quality range of dcr set (5012). These are designed using quality stainless steel and are known for their accurate dimensions, unique designs and durability. The products are offered at industry leading prices to the clients across the industry.  

 

the features of the range offered by us:

 

• 5012 dcr set
• stainless steel probes . 90 mm x 4. 5 cm (20g x 1 3/4 in)
• angled 45 degree, 15 mm from end
• silicone rod length 40 cm (15 3/4 in)
• diameter: . 80 mm (. 032 in)

Ready to use for cleansing of tear ducts.

Manufacturing materials :

• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Latex : none.

Description :

Sterile, disposable straight lacrimal cannula.

Instructions for use :

Lacrimal cannulas are used for cleansing of tear ducts. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cannula aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cannula in a sharps disposal box.

Packaging :

Individually packaged in sterile blister packs.

Storage conditions :

Store at ambient temperature and protect from moisture.

Disposal conditions :

Waste generated :

The waste generated is to be considered as waste involving infectious or related hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g

Construction : Synthetic origin

Sterilisation :

The products are sterilised by irradiation in accordance with standard EN 552. Shelf life : the shelf life years is three years.

Cannulas with very fine angled tips to allow irrigation and holding of the anterior chamber during surgery. The irrigation cannula can be used to provide regular irrigation of the cornea. Ready for use in cataract surgery.

Manufacturing materials :

• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Latex : none.

Description :

Sterile, disposable Rycroft anterior chamber irrigation cannula, 40° angled at 4 mm from the tip.

Instructions for use :

Rycroft cannulas are used to irrigate the anterior chamber and moisten the cornea during cataract surgery. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cannula aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cannula in a sharps disposal box.

Packaging :
Individually packaged in sterile blister packs.
Storage conditions : Store at ambient
temperature and protect from moisture.

Disposal conditions :
Waste generated : The waste generated is to be
considered as waste involving infectious or related
hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g - Construction : Synthetic origin

Sterilisation : The products are sterilised by irradiation in accordance with standard EN 552. Shelf life : the shelf life years is three years.

Visco-Elastic Cannula

Ready for use for intraocular injection of the viscoelastic solutions.

Manufacturing materials :

• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Latex : none.

Description :

Disposable, sterile cannula for viscoelastic solutions, 45° angled at 9mm from the tip.

Instructions for use :

Viscoelastic cannulas are used to inject viscoelastic solutions, during eye surgery. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cannula aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cannulas in a sharps disposal box.

Packaging :

Individually packaged in sterile blister packs.

Storage conditions :

Store at ambient temperature and protect from
moisture.

Disposal conditions :
Waste generated :

The waste generated is to be considered as waste involving infectious or related hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g
Construction : Synthetic origin

Sterilisation :

The products are sterilised by irradiation in accordance with standard EN 552. Shelf life : the shelf life years is three years.

PRODUCT INFORMATION
Cortex Extractor (Charleux)

This cannula has a rounded, foam-covered tip and is specially designed for aspirating cortex. Ready to use for cataract surgery.

Manufacturing materials :
• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Latex : none.

Description :
Sterile, disposable Cortex extractor, curved, with rounded edges tip.

Instructions for use :

Cortex extractor are used to aspirate cortex during cataract surgery. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cannula aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cannula in a sharps disposal box.

Packaging :
Individually packaged in sterile blister packs.

Storage conditions :
Store at ambient temperature and protect from moisture.

Disposal conditions :
Waste generated :
The waste generated is to be considered as waste involving infectious or related hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g - Construction : Synthetic origin

Sterilisation :
The products are sterilised by irradiation accordance with standard EN 552. Shelf life : the shelf life years is three years.

PRODUCT INFORMATION
J-Shaped Aspiration Cannula

The tip of this cannula is specially designed to remove cortex located between 10 o'clock and 2 o'clock. Ready for use in cataract surgery.

Manufacturing materials :
• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Latex : none.

Description :
Sterile, disposable J-Shaped aspiration cannula cannula.

Instructions for use :
J-Shaped aspiration cannulas are used to aspirate cortex around 12 o'clock. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cannula aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cannula in a sharps disposal box.

Packaging :
Individually packaged in sterile blister packs.n Storage conditions : Store at ambient temperature and protect from moisture.

Disposal conditions :
Waste generated :
The waste generated is to be considered as waste involving infectious or related hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g - Construction : Synthetic origin

Sterilisation : The products are sterilised by irradiation in accordance with standard EN 552. Shelf life : the shelf life years is three years.

Cannula designed for polishing and cleaning the posterior capsule including the equatorial area, prior to insertion of the intraocular lens. Ready for use in cataract surgery.

Manufacturing materials :
• Polyethylene : cannula fitting ;
• Stainless steel : cannula tube ;
• Silicon : soft polishing sleeve ;
• Latex : none.

Description :
Sterile, disposable Silicon Tip polisher, tube 45° angled at 9 mm from tip, 12 mm soft polishing sleeve. 

Instructions for use : Silicon Tip polishers are used to polish the posterior capsule during cataract surgery. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the Silicon Tip polisher aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the Silicon Tip polisher in a sharps disposal box.

Packaging :
Individually packaged in sterile blister packs.

Storage conditions : Store at ambient temperature and protect from
moisture.

Disposal conditions :
Waste generated :

The waste generated is to be considered as waste involving infectious or related hazards. There are two types of waste material : polyethylene and the metal used for the ends of the cannulas. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

Product weight : 1,80 g - Construction : Synthetic origin

Sterilisation : The products are sterilised by irradiation in accordance with standard EN 552.

Shelf life : the shelf life years is three years.

Cystotomes

tip designed for opening of anterior capsule (capsulorhexis) prior to phakoemulsification with a luer lock to allow irrigation for each cystotome; ready for use in cataract surgery.

Manufacturing materials :

• polyethylene : cannula fitting ;
• stainless steel : cannula tube ;
• latex : none.

Description :

sterile, disposable formed irrigating cystotomes with a 90° angled tip.

Instructions for use :

irrigating cystotomes are used to perform capsulorhexis. Check that the individual sterile protective pack is unopened and verify the expiry date. Open the individual sterile protective pack aseptically. Remove the cystotome aseptically and place on the operating table. Do not resterilise. At the end of surgery, place the cystotome in a sharps disposal box.

Packaging :

individually packaged in sterile blister packs.

Storage conditions :

store at ambient temperature and protect from
moisture.

disposal conditions :
waste generated :

the waste generated is to be considered as waste involving infectious or related hazards.  there are two types of waste material : polyethylene and the metal used for the ends of the cystotomes. Disposal conditions comprise incineration taking steps to ensure energy recuperation and environmental protection.

product weight : 1,80 g
construction : synthetic origin

sterilisation :

the products are sterilised by irradiation in accordance with standard en 552.

shelf life : the shelf life years is three years.

we manufacture a wide gamut of infusion cannula that is available in standard and customized shapes & sizes. These are designed using superior quality raw material and are known for easy injection of high viscosity substances.  the range is known for having a polished tip that provides direct contact into the bloodstream and installs medicines in the body.  the range offered by us includes:

 

• 5118 infusion cannula 2. 5 mm, 20 g (0. 90 mm) tubing 10 in (25 cm)
• 5119 infusion cannula 4. 0 mm, 20 g (0. 90) tubing 10 in (25 cm)
• 5120 infusion cannula 6. 0 mm, 20g (0. 90 mm) tubing 10 in (25 cm)

we offer a wide range of high viscosity injection that is widely used across the industry for various medical operations. These are safely packed using quality plastics to keep them free from dust & germs. The products are designed using optimum quality raw material and appreciated for their sleek designs, low maintenance and durability. Further, these are available in various standard customized sizes. Our experts ensure that these are timely delivered to the clients.  

 

the range offered by us includes the following:  

 

• 5173 high viscosity cannula 4 mm, 20 g (0. 90 mm) tubing 4 in (10 cm)
• 5184 high viscosity cannula 6. 0 mm, 20 g (0. 90) tubing 4 in (10 cm)
• 5208 high viscosity cannula 4. 0 mm, 20 g (0. 90) tubing 6 in (15-2 cm)
• 5228 high viscosity cannula 6. 0 mm, 20 g (0. 90) tubing 6 in (15-2 cm)